|
2. Screw the pump tightly
into the fuel bottle.
3. Pump the plunger 40 to
55 strokes if it's half full with fuel. If not you only
need to pump it 15 to 20 times. (The less fuel you have
the more pumps you need for proper stove ignition)
4. Transfer the fuel line
through the hole and to the heat reflector.
5. Rotate the two appendages
around to the slots on the heat reflector.
6. Grease the fuel line
with oil or saliva then insert the fuel tube into the pump.
7. Last, snap the metal
catch securely onto the pump.
|
